Home › Forums › RORB – general use › Unspecified Data Error
- This topic has 3 replies, 1 voice, and was last updated 2 days, 16 hours ago by
Kade Small.
-
AuthorPosts
-
July 8, 2025 at 9:37 PM #4320
Kade SmallParticipantTrying to implement a FIT run with the attached catg. and stm. files but I keep receiving an error. I can’t seem to get RORB to produce the observed hydrograph. The error I am receiving is as per the attached image. When I remove the “print observed hydrograph” from the catg. file it works fine and prints the calculated hydrograph as expected.
I assume it is an error with my observed streamflow values in my stm. file but I can’t seem to isolate and resolve the problem.
Any assistance would be greatly appreciated.
-
This topic was modified 3 days, 2 hours ago by Kade Small.
Attachments:
You must be logged in to view attached files.July 8, 2025 at 9:40 PM #4323Kade SmallParticipantThere was an error uploading the stm. file so here is a copy:
36 hours, 8 Feb 2020 1300 to 9 Feb 2020 2300
FIT
C time inc =1h, calcs for 36 incs, single burst, 1 pluvi0, r/f not uniform
1,36,1,1,1,-99
0,35, rain from 0-35 time incs
Hodgson Creek Pluvio
0,5,22,3,9,6,10,4,1,0,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,-99,mm/time inc
78,75,75,72.5,74,79,79,75,72.5,80,76,75,69,70,66,-99, r/f’s on sub-areas
C hydrograph data
0,35,-99, h/g from 0-35 time incs
Hodgson Creek Stream
0,0,0,0,0,0,1.3,3.2,4.8,7.3,568,542.1,542.1,526,497.2,475,453.5,435.7,411.2,383,352.5,239.9,135.1,75.9,43.3,32.4,24.3,19.7,15.3,11.1,8.1,6.5,5.3,4.5,4,-99, ords in m^3/sJuly 8, 2025 at 9:42 PM #4324Kade SmallParticipantThere was an error uploading the catg. file so here is a copy (created with ArcRORB):
Default Catchment – -9999 (Downstream number: 0)
C RORB_GE 6.52
C WARNING – DO NOT EDIT THIS FILE OUTSIDE RORB TO ENSURE BOTH GRAPHICAL AND CATCHMENT DATA ARE COMPATIBLE WITH EACH OTHER
C THIS FILE CANNOT BE OPENED IN EARLIER VERSIONS OF RORB GE – CURRENT VERSION IS v6.52
C
C Default Catchment – -9999 (Downstream number: 0)
C
C #FILE COMMENTS
C 2
C File created using ArcRORB for ArcGIS Pro version 1.0.0.0
C Original CATG file created on 07/07/2025 at 20:35:53
C
C #SUB-AREA AREA COMMENTS
C 1
C Sub-area areas in km²
C
C #IMPERVIOUS FRACTION COMMENTS
C 0
C
C #BACKGROUND IMAGE
C T F
C
C #NODES
C 30
C 1 16.237 7.685 1.000 0 1 0 0.000000 0.000000 71 0 0
C
C 2 28.288 23.291 1.000 0 0 28 0.000000 0.000000 0 0 0
C
C 3 36.471 54.966 1.000 0 0 30 0.000000 0.000000 0 0 0
C
C 4 54.279 60.885 1.000 0 0 26 0.000000 0.000000 0 0 0
C
C 5 67.281 66.519 1.000 0 0 23 0.000000 0.000000 0 0 0
C
C 6 71.297 35.643 1.000 0 0 24 0.000000 0.000000 0 0 0
C
C 7 34.396 66.824 1.000 0 0 29 0.000000 0.000000 0 0 0
C
C 8 28.255 56.787 1.000 1 0 29 H 53.821999 0.000000 0 0 0
C
C 9 76.477 36.844 1.000 1 0 6 J 14.173000 0.000000 0 0 0
C
C 10 42.520 26.926 1.000 1 0 2 K 38.499001 0.000000 0 0 0
C
C 11 49.405 43.522 1.000 1 0 25 L 48.798000 0.000000 0 0 0
C
C 12 65.885 38.413 1.000 1 0 24 M 39.155998 0.000000 0 0 0
C
C 13 34.216 36.318 1.000 1 0 27 N 45.949001 0.000000 0 0 0
C
C 14 29.993 14.330 1.000 1 0 28 O 43.431000 0.000000 0 0 0
C
C 15 26.528 78.928 1.000 1 0 7 G 53.588001 0.000000 0 0 0
C
C 16 39.053 76.299 1.000 1 0 7 F 27.436001 0.000000 0 0 0
C
C 17 45.525 66.660 1.000 1 0 26 E 47.786999 0.000000 0 0 0
C
C 18 64.593 56.111 1.000 1 0 23 D 40.095001 0.000000 0 0 0
C
C 19 73.744 58.820 1.000 1 0 5 A 21.301001 0.000000 0 0 0
C
C 20 73.845 75.110 1.000 1 0 5 B 45.479000 0.000000 0 0 0
C
C 21 58.619 75.800 1.000 1 0 4 C 23.827999 0.000000 0 0 0
C
C 22 77.861 48.653 1.000 1 0 6 I 24.643999 0.000000 0 0 0
C
C 23 63.840 63.204 1.000 0 0 4 0.000000 0.000000 0 0 0
C
C 24 62.107 36.403 1.000 0 0 25 0.000000 0.000000 0 0 0
C
C 25 46.587 46.855 1.000 0 0 3 0.000000 0.000000 0 0 0
C
C 26 41.957 58.145 1.000 0 0 3 0.000000 0.000000 0 0 0
C
C 27 29.096 30.721 1.000 0 0 2 0.000000 0.000000 0 0 0
C
C 28 26.928 16.103 1.000 0 0 1 0.000000 0.000000 0 0 0
C
C 29 31.360 56.695 1.000 0 0 30 0.000000 0.000000 0 0 0
C
C 30 32.745 49.543 1.000 0 0 27 0.000000 0.000000 0 0 0
C
C
C #REACHES
C 29
C 1 20 5 0 1 0 3.978 0.000 2 0
C 71.111 69.795
C 72.785 71.003
C 2 19 5 0 1 0 3.803 0.000 1 0
C 68.611
C 63.413
C 3 18 23 0 1 0 2.172 0.000 1 0
C 64.217
C 59.658
C 4 5 23 0 1 0 1.841 0.000 1 0
C 65.560
C 64.862
C 5 21 4 0 1 0 5.389 0.000 2 0
C 57.308 58.178
C 72.077 67.157
C 6 17 26 0 1 0 3.032 0.000 1 0
C 43.741
C 62.403
C 7 4 26 0 1 0 5.715 0.000 1 0
C 47.730
C 57.446
C 8 22 6 0 1 0 5.085 0.000 1 0
C 72.436
C 41.339
C 9 9 6 0 1 0 2.351 0.000 1 0
C 73.887
C 36.243
C 10 6 24 0 1 0 4.294 0.000 1 0
C 64.234
C 34.526
C 11 12 24 0 1 0 1.869 0.000 1 0
C 64.321
C 36.698
C 12 11 25 0 1 0 1.616 0.000 1 0
C 47.996
C 45.188
C 13 16 7 0 1 0 3.675 0.000 1 0
C 36.325
C 73.401
C 14 15 7 0 1 0 6.040 0.000 1 0
C 34.252
C 74.508
C 15 3 30 0 1 0 2.341 0.000 1 0
C 34.608
C 52.254
C 16 7 29 0 1 0 3.606 0.000 1 0
C 31.091
C 60.954
C 17 8 29 0 1 0 1.468 0.000 1 0
C 30.325
C 56.000
C 18 13 27 0 1 0 2.895 0.000 1 0
C 30.957
C 31.812
C 19 10 2 0 1 0 6.661 0.000 1 0
C 35.189
C 27.694
C 20 2 28 0 1 0 2.321 0.000 1 0
C 27.698
C 17.429
C 21 14 28 0 1 0 1.498 0.000 1 0
C 28.642
C 15.583
C 22 23 4 0 1 0 4.499 0.000 2 0
C 61.802 59.909
C 62.056 63.108
C 23 24 25 0 1 0 8.101 0.000 2 0
C 56.188 50.021
C 38.885 47.464
C 24 25 3 0 1 0 5.699 0.000 2 0
C 44.857 40.050
C 46.761 55.096
C 25 26 3 0 1 0 2.961 0.000 1 0
C 38.350
C 58.414
C 26 27 2 0 1 0 2.365 0.000 1 0
C 28.042
C 27.668
C 27 28 1 0 1 0 6.003 0.000 3 0
C 26.513 24.462 21.168
C 14.744 15.987 10.756
C 28 29 30 0 1 0 2.250 0.000 1 0
C 32.053
C 53.119
C 29 30 27 0 1 0 6.659 0.000 4 0
C 31.062 31.786 30.749 28.866
C 42.603 40.115 36.206 35.586
C
C #STORAGES
C 0
C
C #INFLOW/OUTFLOW
C 0
C
C END RORB_GE
C
C File created using ArcRORB for ArcGIS Pro version 1.0.0.0
C Original CATG file created on 07/07/2025 at 20:35:53
1
1, 3.803, -99 ,Reach 2 node 19 Sub-area A, Reach – Generate rainfall excess h’graph and route downstream
3 , Store running hydrograph
1, 3.978, -99 ,Reach 1 node 20 Sub-area B, Reach – Generate rainfall excess h’graph and route downstream
4 , Add running h’graph to last stored h’graph
5, 1.841, -99 ,Reach 4 Reach – Route running h’graph downstream
3 , Store running hydrograph
1, 2.172, -99 ,Reach 3 node 18 Sub-area D, Reach – Generate rainfall excess h’graph and route downstream
4 , Add running h’graph to last stored h’graph
5, 4.499, -99 ,Reach 22 Reach – Route running h’graph downstream
3 , Store running hydrograph
1, 5.389, -99 ,Reach 5 node 21 Sub-area C, Reach – Generate rainfall excess h’graph and route downstream
4 , Add running h’graph to last stored h’graph
5, 5.715, -99 ,Reach 7 Reach – Route running h’graph downstream
3 , Store running hydrograph
1, 3.032, -99 ,Reach 6 node 17 Sub-area E, Reach – Generate rainfall excess h’graph and route downstream
4 , Add running h’graph to last stored h’graph
5, 2.961, -99 ,Reach 25 Reach – Route running h’graph downstream
3 , Store running hydrograph
1, 2.351, -99 ,Reach 9 node 9 Sub-area J, Reach – Generate rainfall excess h’graph and route downstream
3 , Store running hydrograph
1, 5.085, -99 ,Reach 8 node 22 Sub-area I, Reach – Generate rainfall excess h’graph and route downstream
4 , Add running h’graph to last stored h’graph
5, 4.294, -99 ,Reach 10 Reach – Route running h’graph downstream
3 , Store running hydrograph
1, 1.869, -99 ,Reach 11 node 12 Sub-area M, Reach – Generate rainfall excess h’graph and route downstream
4 , Add running h’graph to last stored h’graph
5, 8.101, -99 ,Reach 23 Reach – Route running h’graph downstream
3 , Store running hydrograph
1, 1.616, -99 ,Reach 12 node 11 Sub-area L, Reach – Generate rainfall excess h’graph and route downstream
4 , Add running h’graph to last stored h’graph
5, 5.699, -99 ,Reach 24 Reach – Route running h’graph downstream
4 , Add running h’graph to last stored h’graph
5, 2.341, -99 ,Reach 15 Reach – Route running h’graph downstream
3 , Store running hydrograph
1, 6.040, -99 ,Reach 14 node 15 Sub-area G, Reach – Generate rainfall excess h’graph and route downstream
3 , Store running hydrograph
1, 3.675, -99 ,Reach 13 node 16 Sub-area F, Reach – Generate rainfall excess h’graph and route downstream
4 , Add running h’graph to last stored h’graph
5, 3.606, -99 ,Reach 16 Reach – Route running h’graph downstream
3 , Store running hydrograph
1, 1.468, -99 ,Reach 17 node 8 Sub-area H, Reach – Generate rainfall excess h’graph and route downstream
4 , Add running h’graph to last stored h’graph
5, 2.250, -99 ,Reach 28 Reach – Route running h’graph downstream
4 , Add running h’graph to last stored h’graph
5, 6.659, -99 ,Reach 29 Reach – Route running h’graph downstream
3 , Store running hydrograph
1, 2.895, -99 ,Reach 18 node 13 Sub-area N, Reach – Generate rainfall excess h’graph and route downstream
4 , Add running h’graph to last stored h’graph
5, 2.365, -99 ,Reach 26 Reach – Route running h’graph downstream
3 , Store running hydrograph
1, 6.661, -99 ,Reach 19 node 10 Sub-area K, Reach – Generate rainfall excess h’graph and route downstream
4 , Add running h’graph to last stored h’graph
5, 2.321, -99 ,Reach 20 Reach – Route running h’graph downstream
3 , Store running hydrograph
1, 1.498, -99 ,Reach 21 node 14 Sub-area O, Reach – Generate rainfall excess h’graph and route downstream
4 , Add running h’graph to last stored h’graph
5, 6.003, -99 ,Reach 27 Reach – Route running h’graph downstream
7.1 , PRINT
0
C Sub-area areas in km²
21.30100, 45.47900, 40.09500, 23.82800, 47.78700,
14.17300, 24.64400, 39.15600, 48.79800, 53.58800,
27.43600, 53.82200, 45.94900, 38.49900, 43.43100,
-99
C Impervious Fraction Data
0, -99 ,No impervious areas in systemJuly 9, 2025 at 7:25 AM #4325Kade SmallParticipantPlease disregard, I was able to locate the problem.
Regards
Kade
-
This topic was modified 3 days, 2 hours ago by
-
AuthorPosts
- You must be logged in to reply to this topic.
