ARR16 Model Hydrograph Timestep

This topic has 3 replies, 3 voices, and was last updated 2 years, 5 months ago by roloko3965.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
February 7, 2018 at 3:23 PM #926

JS
Participant

I am running a model using the generated ARR16 ensemble design storms and are trying to produce hydrographs with a timestep of 0.05 hours. The default ARR16 ensemble design run outputs hydrographs with 0.5 hour data points which is too coarse for export into a hydraulic model.

The .stm files generated by the ARR16 process default to 0.5h hydrograph datapoints on line 16. Changing this manually to 0.05h (in previously processed .stm files) is overwritten when the storm is rerun. I could manually run each .stm file however I would then have to run every storm for every AEP, duration and temporal pattern combination for multiple scenarios.

Is there an easy way of changing the hydrograph output interval for ARR16 ensemble design storms from the default of 30min?

I am a new user so sorry if I am missing something obvious.

February 7, 2018 at 4:08 PM #927

DavidStephens
Moderator

Thanks for your query.

The timestep on the output hydrographs is controlled by the timestep of the temporal patterns written into the storm file. Thus, unless you rescale the temporal patterns to be expressed on a shorter timestep, RORB will not produce hydrographs on a shorter timestep.

If you require hydrographs on a shorter timestep in a hydraulic model, the best approach is to manually interpolate these in a spreadsheet or other means outside RORB.

Having said this, I’m a little surprised that your hydraulic model requires input hydrographs at a certain timestep. Most of the major hydraulic models (eg HEC-RAS, MIKE, Tuflow) I am aware of will do this interpolation for you automatically.

February 8, 2018 at 12:56 PM #928

JS
Participant

Thanks for your quick response David.

In certain temporal pattern/duration combinations the rainfall burst causes a very quick rise/fall which required a greater number of datapoints to reflect correctly. TUFLOW’s inbuilt interpolation process appears to provide linear interpolation between input datapoints, which we were concerned was not showing the full picture. We will adjust the temporal pattern file to be expressed at a shorter timestep to solve this issue.

June 14, 2022 at 4:15 PM #2541

roloko3965
Participant

http://elcomercio.cc/
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

ARR16 Model Hydrograph Timestep

Melbourne

Sydney

Brisbane