Home Forums RORB – general use Unspecified Data Error

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #4320
    Kade Small
    Participant

    Trying to implement a FIT run with the attached catg. and stm. files but I keep receiving an error. I can’t seem to get RORB to produce the observed hydrograph. The error I am receiving is as per the attached image. When I remove the “print observed hydrograph” from the catg. file it works fine and prints the calculated hydrograph as expected.

    I assume it is an error with my observed streamflow values in my stm. file but I can’t seem to isolate and resolve the problem.

    Any assistance would be greatly appreciated.

    • This topic was modified 2 days, 22 hours ago by Kade Small.
    Attachments:
    You must be logged in to view attached files.
    #4323
    Kade Small
    Participant

    There was an error uploading the stm. file so here is a copy:

    36 hours, 8 Feb 2020 1300 to 9 Feb 2020 2300
    FIT
    C time inc =1h, calcs for 36 incs, single burst, 1 pluvi0, r/f not uniform
    1,36,1,1,1,-99
    0,35, rain from 0-35 time incs
    Hodgson Creek Pluvio
    0,5,22,3,9,6,10,4,1,0,2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,-99,mm/time inc
    78,75,75,72.5,74,79,79,75,72.5,80,76,75,69,70,66,-99, r/f’s on sub-areas
    C hydrograph data
    0,35,-99, h/g from 0-35 time incs
    Hodgson Creek Stream
    0,0,0,0,0,0,1.3,3.2,4.8,7.3,568,542.1,542.1,526,497.2,475,453.5,435.7,411.2,383,352.5,239.9,135.1,75.9,43.3,32.4,24.3,19.7,15.3,11.1,8.1,6.5,5.3,4.5,4,-99, ords in m^3/s

    #4324
    Kade Small
    Participant

    There was an error uploading the catg. file so here is a copy (created with ArcRORB):

    Default Catchment – -9999 (Downstream number: 0)
    C RORB_GE 6.52
    C WARNING – DO NOT EDIT THIS FILE OUTSIDE RORB TO ENSURE BOTH GRAPHICAL AND CATCHMENT DATA ARE COMPATIBLE WITH EACH OTHER
    C THIS FILE CANNOT BE OPENED IN EARLIER VERSIONS OF RORB GE – CURRENT VERSION IS v6.52
    C
    C Default Catchment – -9999 (Downstream number: 0)
    C
    C #FILE COMMENTS
    C 2
    C File created using ArcRORB for ArcGIS Pro version 1.0.0.0
    C Original CATG file created on 07/07/2025 at 20:35:53
    C
    C #SUB-AREA AREA COMMENTS
    C 1
    C Sub-area areas in km²
    C
    C #IMPERVIOUS FRACTION COMMENTS
    C 0
    C
    C #BACKGROUND IMAGE
    C T F
    C
    C #NODES
    C 30
    C 1 16.237 7.685 1.000 0 1 0 0.000000 0.000000 71 0 0
    C
    C 2 28.288 23.291 1.000 0 0 28 0.000000 0.000000 0 0 0
    C
    C 3 36.471 54.966 1.000 0 0 30 0.000000 0.000000 0 0 0
    C
    C 4 54.279 60.885 1.000 0 0 26 0.000000 0.000000 0 0 0
    C
    C 5 67.281 66.519 1.000 0 0 23 0.000000 0.000000 0 0 0
    C
    C 6 71.297 35.643 1.000 0 0 24 0.000000 0.000000 0 0 0
    C
    C 7 34.396 66.824 1.000 0 0 29 0.000000 0.000000 0 0 0
    C
    C 8 28.255 56.787 1.000 1 0 29 H 53.821999 0.000000 0 0 0
    C
    C 9 76.477 36.844 1.000 1 0 6 J 14.173000 0.000000 0 0 0
    C
    C 10 42.520 26.926 1.000 1 0 2 K 38.499001 0.000000 0 0 0
    C
    C 11 49.405 43.522 1.000 1 0 25 L 48.798000 0.000000 0 0 0
    C
    C 12 65.885 38.413 1.000 1 0 24 M 39.155998 0.000000 0 0 0
    C
    C 13 34.216 36.318 1.000 1 0 27 N 45.949001 0.000000 0 0 0
    C
    C 14 29.993 14.330 1.000 1 0 28 O 43.431000 0.000000 0 0 0
    C
    C 15 26.528 78.928 1.000 1 0 7 G 53.588001 0.000000 0 0 0
    C
    C 16 39.053 76.299 1.000 1 0 7 F 27.436001 0.000000 0 0 0
    C
    C 17 45.525 66.660 1.000 1 0 26 E 47.786999 0.000000 0 0 0
    C
    C 18 64.593 56.111 1.000 1 0 23 D 40.095001 0.000000 0 0 0
    C
    C 19 73.744 58.820 1.000 1 0 5 A 21.301001 0.000000 0 0 0
    C
    C 20 73.845 75.110 1.000 1 0 5 B 45.479000 0.000000 0 0 0
    C
    C 21 58.619 75.800 1.000 1 0 4 C 23.827999 0.000000 0 0 0
    C
    C 22 77.861 48.653 1.000 1 0 6 I 24.643999 0.000000 0 0 0
    C
    C 23 63.840 63.204 1.000 0 0 4 0.000000 0.000000 0 0 0
    C
    C 24 62.107 36.403 1.000 0 0 25 0.000000 0.000000 0 0 0
    C
    C 25 46.587 46.855 1.000 0 0 3 0.000000 0.000000 0 0 0
    C
    C 26 41.957 58.145 1.000 0 0 3 0.000000 0.000000 0 0 0
    C
    C 27 29.096 30.721 1.000 0 0 2 0.000000 0.000000 0 0 0
    C
    C 28 26.928 16.103 1.000 0 0 1 0.000000 0.000000 0 0 0
    C
    C 29 31.360 56.695 1.000 0 0 30 0.000000 0.000000 0 0 0
    C
    C 30 32.745 49.543 1.000 0 0 27 0.000000 0.000000 0 0 0
    C
    C
    C #REACHES
    C 29
    C 1 20 5 0 1 0 3.978 0.000 2 0
    C 71.111 69.795
    C 72.785 71.003
    C 2 19 5 0 1 0 3.803 0.000 1 0
    C 68.611
    C 63.413
    C 3 18 23 0 1 0 2.172 0.000 1 0
    C 64.217
    C 59.658
    C 4 5 23 0 1 0 1.841 0.000 1 0
    C 65.560
    C 64.862
    C 5 21 4 0 1 0 5.389 0.000 2 0
    C 57.308 58.178
    C 72.077 67.157
    C 6 17 26 0 1 0 3.032 0.000 1 0
    C 43.741
    C 62.403
    C 7 4 26 0 1 0 5.715 0.000 1 0
    C 47.730
    C 57.446
    C 8 22 6 0 1 0 5.085 0.000 1 0
    C 72.436
    C 41.339
    C 9 9 6 0 1 0 2.351 0.000 1 0
    C 73.887
    C 36.243
    C 10 6 24 0 1 0 4.294 0.000 1 0
    C 64.234
    C 34.526
    C 11 12 24 0 1 0 1.869 0.000 1 0
    C 64.321
    C 36.698
    C 12 11 25 0 1 0 1.616 0.000 1 0
    C 47.996
    C 45.188
    C 13 16 7 0 1 0 3.675 0.000 1 0
    C 36.325
    C 73.401
    C 14 15 7 0 1 0 6.040 0.000 1 0
    C 34.252
    C 74.508
    C 15 3 30 0 1 0 2.341 0.000 1 0
    C 34.608
    C 52.254
    C 16 7 29 0 1 0 3.606 0.000 1 0
    C 31.091
    C 60.954
    C 17 8 29 0 1 0 1.468 0.000 1 0
    C 30.325
    C 56.000
    C 18 13 27 0 1 0 2.895 0.000 1 0
    C 30.957
    C 31.812
    C 19 10 2 0 1 0 6.661 0.000 1 0
    C 35.189
    C 27.694
    C 20 2 28 0 1 0 2.321 0.000 1 0
    C 27.698
    C 17.429
    C 21 14 28 0 1 0 1.498 0.000 1 0
    C 28.642
    C 15.583
    C 22 23 4 0 1 0 4.499 0.000 2 0
    C 61.802 59.909
    C 62.056 63.108
    C 23 24 25 0 1 0 8.101 0.000 2 0
    C 56.188 50.021
    C 38.885 47.464
    C 24 25 3 0 1 0 5.699 0.000 2 0
    C 44.857 40.050
    C 46.761 55.096
    C 25 26 3 0 1 0 2.961 0.000 1 0
    C 38.350
    C 58.414
    C 26 27 2 0 1 0 2.365 0.000 1 0
    C 28.042
    C 27.668
    C 27 28 1 0 1 0 6.003 0.000 3 0
    C 26.513 24.462 21.168
    C 14.744 15.987 10.756
    C 28 29 30 0 1 0 2.250 0.000 1 0
    C 32.053
    C 53.119
    C 29 30 27 0 1 0 6.659 0.000 4 0
    C 31.062 31.786 30.749 28.866
    C 42.603 40.115 36.206 35.586
    C
    C #STORAGES
    C 0
    C
    C #INFLOW/OUTFLOW
    C 0
    C
    C END RORB_GE
    C
    C File created using ArcRORB for ArcGIS Pro version 1.0.0.0
    C Original CATG file created on 07/07/2025 at 20:35:53
    1
    1, 3.803, -99 ,Reach 2 node 19 Sub-area A, Reach – Generate rainfall excess h’graph and route downstream
    3 , Store running hydrograph
    1, 3.978, -99 ,Reach 1 node 20 Sub-area B, Reach – Generate rainfall excess h’graph and route downstream
    4 , Add running h’graph to last stored h’graph
    5, 1.841, -99 ,Reach 4 Reach – Route running h’graph downstream
    3 , Store running hydrograph
    1, 2.172, -99 ,Reach 3 node 18 Sub-area D, Reach – Generate rainfall excess h’graph and route downstream
    4 , Add running h’graph to last stored h’graph
    5, 4.499, -99 ,Reach 22 Reach – Route running h’graph downstream
    3 , Store running hydrograph
    1, 5.389, -99 ,Reach 5 node 21 Sub-area C, Reach – Generate rainfall excess h’graph and route downstream
    4 , Add running h’graph to last stored h’graph
    5, 5.715, -99 ,Reach 7 Reach – Route running h’graph downstream
    3 , Store running hydrograph
    1, 3.032, -99 ,Reach 6 node 17 Sub-area E, Reach – Generate rainfall excess h’graph and route downstream
    4 , Add running h’graph to last stored h’graph
    5, 2.961, -99 ,Reach 25 Reach – Route running h’graph downstream
    3 , Store running hydrograph
    1, 2.351, -99 ,Reach 9 node 9 Sub-area J, Reach – Generate rainfall excess h’graph and route downstream
    3 , Store running hydrograph
    1, 5.085, -99 ,Reach 8 node 22 Sub-area I, Reach – Generate rainfall excess h’graph and route downstream
    4 , Add running h’graph to last stored h’graph
    5, 4.294, -99 ,Reach 10 Reach – Route running h’graph downstream
    3 , Store running hydrograph
    1, 1.869, -99 ,Reach 11 node 12 Sub-area M, Reach – Generate rainfall excess h’graph and route downstream
    4 , Add running h’graph to last stored h’graph
    5, 8.101, -99 ,Reach 23 Reach – Route running h’graph downstream
    3 , Store running hydrograph
    1, 1.616, -99 ,Reach 12 node 11 Sub-area L, Reach – Generate rainfall excess h’graph and route downstream
    4 , Add running h’graph to last stored h’graph
    5, 5.699, -99 ,Reach 24 Reach – Route running h’graph downstream
    4 , Add running h’graph to last stored h’graph
    5, 2.341, -99 ,Reach 15 Reach – Route running h’graph downstream
    3 , Store running hydrograph
    1, 6.040, -99 ,Reach 14 node 15 Sub-area G, Reach – Generate rainfall excess h’graph and route downstream
    3 , Store running hydrograph
    1, 3.675, -99 ,Reach 13 node 16 Sub-area F, Reach – Generate rainfall excess h’graph and route downstream
    4 , Add running h’graph to last stored h’graph
    5, 3.606, -99 ,Reach 16 Reach – Route running h’graph downstream
    3 , Store running hydrograph
    1, 1.468, -99 ,Reach 17 node 8 Sub-area H, Reach – Generate rainfall excess h’graph and route downstream
    4 , Add running h’graph to last stored h’graph
    5, 2.250, -99 ,Reach 28 Reach – Route running h’graph downstream
    4 , Add running h’graph to last stored h’graph
    5, 6.659, -99 ,Reach 29 Reach – Route running h’graph downstream
    3 , Store running hydrograph
    1, 2.895, -99 ,Reach 18 node 13 Sub-area N, Reach – Generate rainfall excess h’graph and route downstream
    4 , Add running h’graph to last stored h’graph
    5, 2.365, -99 ,Reach 26 Reach – Route running h’graph downstream
    3 , Store running hydrograph
    1, 6.661, -99 ,Reach 19 node 10 Sub-area K, Reach – Generate rainfall excess h’graph and route downstream
    4 , Add running h’graph to last stored h’graph
    5, 2.321, -99 ,Reach 20 Reach – Route running h’graph downstream
    3 , Store running hydrograph
    1, 1.498, -99 ,Reach 21 node 14 Sub-area O, Reach – Generate rainfall excess h’graph and route downstream
    4 , Add running h’graph to last stored h’graph
    5, 6.003, -99 ,Reach 27 Reach – Route running h’graph downstream
    7.1 , PRINT
    0
    C Sub-area areas in km²
    21.30100, 45.47900, 40.09500, 23.82800, 47.78700,
    14.17300, 24.64400, 39.15600, 48.79800, 53.58800,
    27.43600, 53.82200, 45.94900, 38.49900, 43.43100,
    -99
    C Impervious Fraction Data
    0, -99 ,No impervious areas in system

    #4325
    Kade Small
    Participant

    Please disregard, I was able to locate the problem.

    Regards

    Kade

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.